Productos

PIONEER SA-9500

Fabian Cardenas

• 2 min read
  • EstadoUsado - Como nuevo
  • MarcaPIONEER

AMPLIFICADOR INTEGRADO VINTAGE EN SU CAJA ORIGINAL PIONEER SA-9500 IMPECABLE

DISPONIBLE EN GADGETS C&B CUENCA WA0991140248

País: Japon
Pioneer Corporation; Tokyo
Año: 1975/1976

Numero de transistores
56
Semiconductores
Principio principal
Amplificador de Audio
Gama de ondas
- no hay
Especialidades
Hi-Fi equipment
Tensión de funcionamiento
Red: Corriente alterna (CA, Inglés = AC) / 120; 220; 120/220/240 Volt
Altavoz
- Este modelo usa altavoz exterior (1 o más).
Potencia de salida
160 W (undistorted)
Material
Metálico
de Radiomuseum.org
Modelo: Stereo Amplifier SA-9500 - Pioneer Corporation; Tokyo
Forma
Unidad para estanteria.
Ancho, altura, profundidad
420 x 165 x 403 mm / 16.5 x 6.5 x 15.9 inch
Anotaciones
A hi-fi stereo integrated amplifier housed in a heavy duty metal case with continuous power output of 80 watts per channel, min. RMS into 8 ohms or 100 watts per channel into 4 ohms from 20Hz to 20,000Hz with no more than 0.1% THD.

Specification
Continuous Power Output
1kHz (Both channels driven) 85 watts per channel into 8Ω
110 watts per channel into 4Ω
THD (20Hz—20,000Hz)
Continuous rated power output
40 watts per channel power output 8Ω No more than 0.1%
No more than 0.05%
Intermodulation Distortion
Continuous rated power output
40 watts per channel power output 8Ω No more than 0.1%
No more than 0.05%
Frequency Response 10Hz—80,000Hz +0dB,-1dB
Input Sensitivity/Impedance 1V/50kΩ (POWER AMP. IN)
Output Speaker
Headphone A, B, A+B
Low impedance
Damping Factor 30 (20Hz—20,000Hz, 8Ω)
Hum and Noise 100dB (IHF short-circuited A network)
PREAMPLIFIER SECTION
Inputs
Sensitivity/Impedance
PHONO 1
PHONO 2
MIC
TUNER
AUX 1 & 2
TAPE PB 1 & 2 2.5mV/50kΩ
2.5mV—10mV/35, 50, 70, 100kΩ
6mV—24mV/85kΩ
150mV/50kΩ
150mV/50kΩ
150mV/50kΩ
Outputs
Level/Impedance
TAPE REC 1 & 2
PRE OUT 150mV
2V/1kΩ
THD No more than 0.05% (20Hz—20KHz)
Frequency Response
PHONO (RIAA equalization)
TUNER, AUX, TAPE PB 30Hz—15KHz ±0.2dB
7Hz—40KHz +0dB,-1dB
Filter
LOW
HIGH 15Hz, 30Hz (12dB/oct.)
8KHz, 12KHz (12dB/oct.)
Hum and Noise
(IHF, short-circuited A network)
PHONO
MIC
TUNER, AUX, TAPE PB 70dB
65dB
90dB
Attenuator 0, -15dB, -30dB
Semiconductors: 2 FETs, 54 Transistors, 26 Diodes

Versions/Power requirements
KCU USA, Canada / 120V AC 60Hz
GN Scandinavia / 220V AC 50/60Hz
D General Export / 120/220/240V AC 50/60Hz with voltage selector

Power consumption: 370 watts (KCU), 310 watts (GN, D)

Peso neto
20 kg / 44 lb 0.8 oz (44.053 lb)